GMW15816

GMW15816

Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, UV Stabilized
Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, Integrally Colored
Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, Integrally Colored

: GMW

: 2220000282343

: true

true
Format
$38.00
true

Publication Date: 03/01/2016 - Complete Document *

Description :

Material Description. This specification covers the properties of natural, Ultraviolet (UV) and heat stabilized, thermoplastic vulcanizates (TPV), containing fully crosslinked Ethylene Propylene Diene Monomer (EPDM) elastomer particles dispersed in a continuous polypropylene (PP) matrix. These materials can be processed by extrusion, injection, and blow molding.

Material types are delineated by hardness values. The types and corresponding hardnesses available are identified in Appendix A, Table A1.

Symbols. The material abbreviation according to ISO 18064 is >TPV-(EPDM + PP)<.

Applicability. Typical applications include the following: seal belt sleeves, knobs, key pads, mats, seals, trays, liners, trim lips, overmolds, and parts where softness and conformity are needed.

 

Document Type : Complete Document

Edition : Issue 3; English

Language : English

Page Count : 7

Publication Date : 03/01/2016

Revision : 3

Status : Current

Title : Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, UV Stabilized

Publication Date: 01/01/2011 - Complete Document *

Description :

Note: Nothing in this standard supercedes applicable laws and regulations.

Note: In the event of conflict between the English and domestic language, the English language shall take precedence.

Material Description. This specification covers the properties of natural, Ultraviolet (UV) and heat stabilized, thermoplastic vulcanizates (TPV) containing fully crosslinked Ethylene-Propylene-Diene Monomer (EPDM) elastomer particles dispersed in a continuous polypropylene (PP) matrix. These materials can be processed by extrusion, injection, and blow molding.

Material types are delineated by hardness values. The types and corresponding hardnesses available are identified in Appendix A, Table A1.

Symbols. The material abbreviation according to ISO 18064 is &gt;TPV-(EPDM + PP)&lt;.

Typical Applications. Typical applications include the following: seal belt sleeves, knobs, key pads, mats, seals, trays, liners, trim lips, overmolds, and parts where softness and conformity are needed.

Remarks. Not applicable.

Document Type : Complete Document

Edition : Issue 2; English

Language : English

Page Count : 8

Publication Date : 01/01/2011

Revision : 2

Status : Historical

Title : Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, Integrally Colored

Publication Date: 09/01/2008 - Complete Document *

Description :

Material Description. This specification covers the properties of natural, Ultraviolet (UV) and heat stabilized, thermoplastic vulcanizates containing fully crosslinked Ethylene-Propylene-Diene Monomer (EPDM) elastomer particles dispersed in a continuous polypropylene (PP) matrix. These materials can be processed by extrusion, injection, and blow molding.

Material types are delineated by hardness values. The types and corresponding hardnesses available are identified in Appendix A, Table A1.

Symbols. The material abbreviation according to ISO 18064 is >TPV-(EPDM + PP)<.

Typical Applications. Typical applications include the following: seal belt sleeves, knobs, key pads, mats, seals, trays, liners, trim lips, overmolds, and parts where softness and conformity are needed.

Remarks. Not applicable.

Document Type : Complete Document

Edition : English; Replaces GMP.E/P.083, HN 2355, GMP.E/P.153, GMP.E/P.071, GMP.E/P.140, GMP.E/P.136, GMP.E/P.044, GMP.E/P.142, GMP.E/P.012, GMP.E/P.067, GMP.E/P.016 and HN 2355

Language : English

Page Count : 6

Publication Date : 09/01/2008

Revision : 1

Status : Historical

Title : Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, Integrally Colored